• Zip Clip 460mm Toggle Suspension System

  • Zip Clip 460mm Toggle Suspension System (Luma-Lock) consists of pre-determined lengths of wire for the installation of primary and secondary installations. They are designed to be used with Rize blocks and allow for one fixing point per drop as well as reducing the use of studding and channel. They are suitable for primary and secondary support for suspending: light fittings, heat panels, plenum boxes, basket, ladder and tray.

    This keyless system is easy to use and meets the BSEN 12385 standard, with a safe working load of 35kg.


    • The attachment of the Luma-Lock system can be done at ground level
    • Attach the two toggles through the rear of the system being suspended
    • By inverting the toggle parallel to the wire the toggle will swing through 90 degrees
    • Ensure hole is no larger than 12mm diameter
    • Pass the free end of the wire from your top suspension through the zip-clip in the direction of the arrow
    • Pass through the plastic protected loop of the Luma-Lock and back through the zip-clip allowing 15cm of wire protruding
    • Legs should not exceed 60 degrees
    • Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrow indicated
  • Call us on 01322 274226 or sales@fixmart.co.uk to place your order.

Product Options

  • Product CodePack Quantity

No carriage charge on any orders over £50 for next day delivery

Our fast order processing, extensive product range and comprehensive stocks of key lines means we can usually guarantee next day delivery of your order.